01E flat wire winding machine is a light type of machine, this machine saves space, can be divided into two machines, stable performance, high production capacity; Touch screen control panel; The manipulator takes and releases materials.

Specifications:
1、Single or symmetrical combination of two productions are optional
2、Quick switch for winding mold and wire feeder
3、Single or symmetrical combination with automatic loading of the core and automatic pick with the robot arm after completion
4、Optional for vibrating plate or without vibrating plate to load magnetic core, equipped with magnetic core oversize detection function
5、For small order customers, manual winding of magnetic cores can be carried out on a single or symmetric combination machine. After winding, the robot arm can take work-piece to achieve flexible selection of production capacity.
6、Low noise during operation

1、Wire thickness range between 0.10-0.50mm and width range between 0.5-1.5mm 
(the larger copper wire cross section requires the softer copper wire, the larger cross-sectional area copper wire may require two sets of wire feed wheels, the wear of the corresponding wire feed wheel will increase as well. If the line thickness and line width user chooses are close to the maximum, technical communication with us is advised)
2、Magnetic core width is between 10-25mm
3、The copper wire with a thickness of 3-0.15mm or more can reserve for the wire head 
(The inner diameter of the coil determines the length of the wire head. And the longer the wire length, the slower the corresponding speed)
4、The length of the coil end is determined by the mold (line end 18-40mm)
5、Wire stuck alarm function can minimize the wear of the wire wheel
6、Magnetic core oversize alarm and removal function (When automatic mode)
7、Optional ±3mm wire head
8、Independent spool control
9、The combination winder is equipped with a vibrating plate to automatically load the magnetic core, and the capacity per hour are (reserved line head 1200-1300pcs, no reserved line head 1400-1500pcs.)
10、Single machine use voltage: AC220V
Peak power: 1200Watt
Air pressure: 0.4-0.6Mpa
11、Dimension: Single machine: 
Equipped with vibration plate --- - (L1480*W780*H1350)
Without vibration plate------------- (L1250*W680*H1350)
12、Dimension: Symmetrical combination of two machines: 
Equipped with vibration plate --- - (L1480*W1560*H1350) 
Without vibration plate------------- (L1250*W1360*H1350)