BT810 flat wire model is a model aiming at small and medium-sized SQ magnetic core (SQ0808-SQ2820). The appearance of this model is neat and beautiful. In electrical parts, full-japanese control system and associated electrical accessories are adopted. Pneumatic part: the whole platform pneumatic actuator and control element;

Machining part:
All steel core frame and frame and precision machining. Intelligent control and communication, high production capacity (non-outlet head can produce 1000-1100PCS/H). Stable performance; The encapsulation method has a high safety factor; The operation is easy to understand; Fast and easy threading mold change.

1 - Wire thickness range between 0.10-0.40mm and width range between 0.5-1.5mm 
(the larger copper wire cross section requires the softer copper wire, the larger cross-sectional area copper wire may require two sets of wire feed wheels, the wear of the corresponding wire feed wheel will increase as well. If the line thickness and line width user chooses are close to the maximum, technical communication with us is advised)
2 - Magnetic core width is between 0808-2820
3 - The copper wire with a thickness of 0.1-0.4mm width 0.5-1.5mm or more can reserve for the wire head 
(The inner diameter of the coil determines the length of the wire head. and the longer the wire length, the slower the corresponding speed)
4 - The length of the coil end is determined by the mold (line end 18-40mm)
5 - Wire stuck alarm function can minimize the wear of the wire wheel
6 - Magnetic core oversize alarm and removal function (When automatic mode)
7 - Optional ±3mm wire head
8 - Independent spool control
9 - The combination winder is equipped with a vibrating plate to automatically load the magnetic core, and the capacity per hour are (reserved line head 750pcs, no reserved line head 900pcs.)
10 - Machine use voltage: AC220V；Peak power: 1200Watt；Air pressure: 0.4-0.5Mpa
11 - Dimension: L=1500mm； W=1300mm；H=1900mm

updating